Numerical Optimal Control

Lectures: Prof. Dr. Moritz Diehl,          Exercises: Florian Messerer 

The course’s aim is to give an introduction into numerical methods for the solution of optimal control problems in science and engineering. The focus is on both discrete time and continuous time optimal control in continuous state spaces. It is intended for a mixed audience of students from mathematics, engineering and computer science. Students from other fields are also welcome.

*** This page is intended for the course as taught in the winter semester 2024/25 at the University of Freiburg. For a timeless version with a focus on self study of the material see here. ***

Contact: moritz.diehl@imtek.uni-freiburg.de, florian.messerer@imtek.uni-freiburg.de

 

Link to HISinOne

 

Structure of the course

This course is organized as inverted classroom and we provide recordings of the lecture and of the exercise solutions. We will meet once a week to discuss lecture or exercises. The course has 6 ECTS. It is possible to do a project to get an additional 3 ECTS, i.e., a total of 9 ECTS for course+project.

Meetings: We will meet every Tuesday, 14:00 - 16:00 in Room HS II, Albertstr. 23b (Institutsviertel). These meetings are alternatingly dedicated to either Q&A sessions with Prof. Diehl or exercise sessions with the teaching assistant (see below) and will not be recorded.

Ilias: There is also an Ilias course, though most material will be published on the page you are currently viewing. In Ilias, we provide a forum for discussion of any questions you have related to the course, be it organization, content or exercises. Please feel free to open new topics and to answer questions of your fellow students. Further, the mid term quiz will be published on Ilias (see below).

 Link to join Ilias course

Lecture recordings: The lecture recordings were already created in a past semester. There are 20 lectures of approximately 90 minutes each, which amounts to a lecture load of about 2 lectures or 3 hours per week. You can find a recommended schedule for watching them in the calendar below.

Course manuscript: The lectures are accompanied by a detailed course manuscript, which you may find in the materials section below. Please note that it is in general more detailed than the lectures and that we skip some of the chapters. We will distribute printed copies.

Exercises: The exercises are mainly computer based. Computers with (Matlab or Python) and CasADi installed are required to solve them (see below for details). There will be a total of 10 exercises. They will be published throughout the semester, after some time delay followed by a solution manuscript as well as a video recording. The exercises are voluntary (though of course we strongly recommend to solve them). Nonetheless we offer the possibility to hand them in to receive feedback, but for this please respect the deadlines you can find in the calendar below. If you would like feedback on a specific part of the exercise especially, you can state so on your solution sheet.

Q&A sessions: Every second week there will be a virtual Q&A session with Prof. Diehl, where you can ask any questions about the course content. The format is meant to be highly interactive and depends strongly on your participation. We would recommend that while watching the video lectures or reading the course script, you write down any questions that come to your mind, such that you have them readily available for the Q&A sessions.

Exercise sessions: Every other week we will meet for the exercise sessions. They are dedicated to discussing any questions related to the exercises. These can either be questions about the current exercise sheet or questions about the solution to the last sheet. As the Q&A sessions, this format depends heavily on your participation.

Mid term quiz: Some time during the semester, we will publish a quiz on Ilias, with questions covering the course contents so far. It is obligatory that you pass this quiz until a deadline (see calendar)but you have infinitely many trials and at least one week for doing so and will receive instant feedback by auto-grading. Note that the questions will not necessarily be representative of an exam.

Final evaluation: The final exam is a written closed book exam. Only pen, paper, a calculator and two A4 sheets (i.e., 4 pages) of self-chosen content are allowed (handwritten). For students from M.Sc. MSE / ESE and B.Sc. Math, this exam is graded. Students from the M.Sc. Math need to pass the written exam in order to take the graded 11ECTS oral exam. Unmentioned special cases: Everyone who wants ECTS for this course needs to pass the exam.

Projects (more detail in a section below): The optional project (3 ECTS) consists in the formulation and implementation of a self-chosen problem of Numerical Optimal Control, resulting in documented computer code, a project report, and a public presentation. Project work starts in the last third of the semester. For students from the faculty of engineering the project is graded independently from the 6ECTS lecture. For students from the B.Sc. Math, the grade for the lecture&project 9ECTS module is solely determined by the written exam. For students from the M.Sc. Math the project is again a prerequisite to the graded 11ECTS oral exam.

Calendar

DateFormatContentWatch this weekPrepareDeadlines
15.10.Intro-Lec. 1, 2- 
22.10.Q&Aup to including Chap. 2Lec. 3, 4one questionEx 1 (voluntary)
29.10.ExEx 2, 3; sol ex 1Lec. 5, 6one question 
05.11.Q&Aup to including Chap. 4Lec. 7, 8one questionEx 2, 3 (voluntary)
12.11.ExEx 4; sol ex 2, 3Lec. 9, 10one questionEx 4 (voluntary)
19.11.ExEx 5, 6; sol ex 4Lec. 11, 12one question 
26.11.Q&Aup to including Chap. 8.2Lec. 13, 14one questionEx 5, 6 (voluntary)
03.12.ExEx 7, 8; sol ex 5, 6Lec. 15, 16one question 
10.12.Q&Aup to including Chap. 12Lec. 17, 18one questionmid term quiz (obligatory, until 23:59)
17.12.**** no session **Lec. 19, 20-Ex 7, 8 (voluntary)
24.12.**** holiday ** - 
31.12.**** holiday ** - 
07.01.Exex 9, 10; sol ex 7, 8 one question 
14.01.Q&Aall course content, projects one questionEx 9, 10 (voluntary); project commitments
21.01.Exsol ex 9, 10; projects one question 
28.01.Q&Aall course content, projects one question 
04.02.presproject presentations -project presentations
28.02.noneno session, just a deadline -project reports (at 23:59)
TBAexamtime and place TBA - 

 

Manuscript

Lectures

TopicChapters
Lecture 1 - Welcome and introduction Part 1Part 2*-
Lecture 2 - Introduction (cont.) and Newton-type methods1.2 - 2.1
Lecture 3 - Newton-type methods (cont.)2.2 - 2.5
Lecture 4 - Nonlinear optimization**3 - 3.2
Lecture 5 - Nonlinear optimization (cont) and Newton-type optimization algorithms3.3 - 4.1
Lecture 6 - SOSC (recall) and Newton-type optimization algorithms3.3 - 4.2
Lecture 7 - Newton-type optimization algorithms (Inequalities and globalization)4.3 - 4.4
Lecture 8 - Calculating derivatives5
Lecture 9 - Discrete time optimal control7 - 7.3
Lecture 10 - Discrete time optimal control: sparsity structure (cont.)7.3
Lecture 11 - Dynamic Programming8 - 8.3
Lecture 12 - Dynamic Programming (cont.)8.3 - 8.8
Lecture 13 - Differential Dynamic Programming***-
Lecture 14 - Continous time optimal control and numerical simulation9 - 10.2
Lecture 15 - Numerical simulation (cont.)10.2 - 10.5
Lecture 16 - Talk by Michael Neunert and Hamilton Jacobi Bellman Equation11
Lecture 17 - Pontryagin and the indirect approach12
Lecture 18 - Direct Approaches13
Lecture 19 - Model predictive control15
Lecture 20 - Parametric Nonlinear Optimization16

* In part 2 there were some issues with the sound, but if you put your volume on maximum, you should be able to understand everything.
** Unfortunately, the microphone battery died at the end, so the last 10 minutes are mute.
*** Not yet covered by the lecture manuscript. Instead, please refer to Section 8.8.6 of Rawlings, Mayne, Diehl 2017. Model Predictive Control

Exercises

 Sheet (pdf) Material (code)Solution (video) Solution (material)
Exercise 1 - Initial value problemsex1.zipsol ex1ex1_sol.zip
Exercise 2 - Nonlinear optimization and Newton-type methodsex2.zipsol ex2ex2_sol.zip
Exercise 3 - Equality constrained optimizationex3.zipsol ex3ex3_sol.zip
Exercise 4 - Inequality constrained optimizationex4.zipsol ex4ex4_sol.zip
Exercise 5 - Algorithmic differentiation-sol ex5ex5_sol.zip
Exercise 6 - Optimal control formulationsex6.zipsol ex6ex6_sol.zip
Exercise 7 - Dynamic Programmingex7.zipsol ex7ex7_sol.zip
Exercise 8 - Continuous time optimal control-sol ex8ex8_sol.pdf
Exercise 9 - Pontryagin's minimum principleex9.zipsol ex9ex9_sol.zip
Exercise 10 - Model predictive control--ex10_sol.zip

 

Further Material

  • Books
    • Rawlings, J. B., Mayne D. Q., Diehl, M., Model Predictive Control, 2nd Edition, Nobhill Publishing, 2017 (free PDF here)
    • Biegler, L. T., Nonlinear Programming, SIAM, 2010
    • Betts, J., Practical Methods for Optimal Control and Estimation Using Nonlinear Programming, SIAM, 2010
  • Sample exam
  • See the first 10 minute of this talk for a short introduction to embedded optimization.

 

Project

You can find the project guidelines here.

Software

The exercises lean heavily on the open source tool CasADi, which offers an interface to Python, Matlab, and Octave. The computer exercise templates as well as the code solutions will be published in Matlab and Python and we offer support for both. The solution videos however are based on the Matlab version.

Python is one of the major programming languages and via libraries such as NumPy and SciPy a common choice for scientific computing. Apart from CasADi, we will use the libraries NumPy, SciPy and Matplotlib.

Matlab is an environment for numerical computing based on a proprietary language that allows one to easily manipulate matrices and visualize data. The University of Freiburg offers a free-of-cost license to students and staff which can be obtained following the instructions here.

CasADi is a symbolic framework for algorithmic differentiation and numerical optimization. In order to install CasADi, follow the instructions here.
Matlab: Download the binaries for your platform and, after having extracted them, add their location to MATLAB's path. To test your installation run the simple example described at the provided link. If successful, save the path by executing the command savepath. In this way, the location of the binaries will be known even after restarting MATLAB.
Python: You can pip install casadi in your preferred environment.